You Searched For: Graticules, Reticles and Grids

Supplier: Electron Microscopy Sciences

Description: Veco Grids offer superior handling characteristics

Supplier: Electron Microscopy Sciences

Description: These are for counting particles in any of three areas of known size. The graticule is calibrated in the same manner as a normal eyepiece scale. The result is then used to calculate the area of any square.

Supplier: Electron Microscopy Sciences

Description: Veco Grids offer superior handling characteristics. Plus, with a 0.8 mil thickness,rigid grids available.

Supplier: Electron Microscopy Sciences

Description: The NG12 is particularly useful since the array of globes and circles are conveniently close to where the particles pass.

Supplier: Electron Microscopy Sciences

Description: Mertz for stereology. Surface chrome image.

Catalog Number: (100496-368)

Supplier: Electron Microscopy Sciences

Description: These latex particles have a diameter of 0.204 µm and are shadowed with a coating of gold. Measure the finest migrated gold particles in the shadow to determine the resolution of the STEM. Gold shadowed latex on formvar/carbon film, mounted on a copper grid, 3.05 mm diameter.

Supplier: Electron Microscopy Sciences

Description: Reticle A is designed for general laboratory use (5 mm long, with 0.1 mm divisions) and reticle B (⁴/₁₆ " long, ¹/₆₄" divisions) is most frequently used in textiles or electronics, and where measurement in mils is required. Reticle C (5000 µm long, with 50 µm divisions) is calibrated in microns and helpful for pesticide droplet size measurements or anywhere measurements in microns are required.

Supplier: Electron Microscopy Sciences

Description: A thin film of pure carbon is deposited on the shiny side of the grid.

Supplier: Electron Microscopy Sciences

Description: The formvar coated grids are stabilized with an evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. All film is laid on the shiny side of the grid.

Supplier: Electron Microscopy Sciences

Description: A thin film of pure formvar resin coats the shiny side of a Gilder Finder grid.

Supplier: Electron Microscopy Sciences

Description: The formvar coated grids are stabilized with an evaporated carbon film.

Supplier: Electron Microscopy Sciences

Description: QUANTIFOIL® is a carbon film for electron microscopy or low-energy electron point source microscopy.

Supplier: Electron Microscopy Sciences

Description: These athene grids are used in transmission electron microscope.

Supplier: Electron Microscopy Sciences

Description: These 1000, 15000 and 2000 mesh grids for transmsission electron microscopy.

Supplier: Electron Microscopy Sciences

Description: QUANTIFOIL® is a carbon film for electron microscopy or low-energy electron point source microscopy.

Supplier: ELECTRON MICROSCOPY SCIENCE

Description: CVD Graphene TEM support films are supported by lacey carbon film on a 300 mesh copper TEM grid. The graphene film appears as a near-transparent to light-grey film on the surface of the Lacey Carbon mesh on a red-brown colored copper TEM grid.