You Searched For: Film Processing Supplies

Catalog Number: (100496-354)

Supplier: Electron Microscopy Sciences

Description: Photo-Flo Solution decreases water surface tension and minimizes water marks and drying streaks on film. It speed dries.

Certificates

Catalog Number: (100501-846)

Supplier: Electron Microscopy Sciences

Description: A stainless Steel Paper and Film Clip

Supplier: Electron Microscopy Sciences

Description: This is a direct replacement for the Kodak Polycontrast IV RC B&W Papers. Neutral tone – Variable contrast for high speed printing applications. MULTIGRADE RC Express PF has the standard weight of (190g/m²) with a resin coated base.It is especially designed for high speed printing applications, where automatic and semiautomatic printers, printer-processors and minilabs are used.

Supplier: Electron Microscopy Sciences

Description: Designed for use in the Paterson Super System 4 tank, the Auto Load Reel allows thru free flow of solutions. Paterson Reels have a smooth finish and use the unique twin ball ratchet system. Film loading just couldn’t be easier.

Supplier: Electron Microscopy Sciences

Description: All chemicals are concentrated. One quart (0.95L) of concentrate mixed with water will make one gallon of working solution. The MohrPro is also available in a 22” model. MOHRPRO 20 model is a 56 cm (22") wide processor with a “Deep Tank” roller transport design capable of processing 240 - 8x10 RA color prints 54.7 cm (18”/minutes) or 480 - 8x10 B&W RC prints (36”/minute) dry to dry per hour.

Catalog Number: (101381-656)

Supplier: Electron Microscopy Sciences

Description: PQ UNIVERSAL is a liquid concentrate dimezones/hydroquinone developer which is suitable for all RC and FB black and white photographic papers. It is used at a dilution of 1+9, it is clean working and it has excellent keeping properties. It gives a slightly warm neutral image tone with most papers. In addition, PQ UNIVERSAL can be used to dish/tray process ILFORD as well as some other technical films. It is also suitable for dish/tray developing of general purpose sheet films when a fast working, high contrast developer is needed and a high degree of enlargement is not required. PQ UNIVERSAL developer is designed for use at ambient room temperatures, normally 20°C/68°F. We do not recommend its use for high temperature or machine processing applications.

Supplier: Electron Microscopy Sciences

Description: This device when fitted to the 8X magnifier (68125) enables you to view and check the 35mm roll film while marking the desired frame by depressing the puncher (located on the side of the device). The puncher punches out a V-shaped piece of film on the perforation to mark the frame. When fitted in the reverse position to the 8X magnifier, you are able to view and check the slides.

Supplier: Electron Microscopy Sciences

Description: The Super System 4 is simpler to load, faster to fill, and easier to clean than any other tank. It has a large diameter one-piece lid and funnel, which clips into place positively and securely enabling the tank to be filled and emptied quickly. The Paterson 35 mm tank takes a single 35 mm film. The Paterson Universal tank takes two 35 mm films or a single 120/220 film. Supplied complete with one 35mm/120/220 Auto Load Reel, Watertight EVA cap prevents leakage during inversion agitation. Uses less than 300 mL solution for a single 35 mm film.

Supplier: Electron Microscopy Sciences

Description: Archival quality, white writing edge, crystal clear. Allows for the study of your print without removing it from the sleeve. Packed in 100 per pack.

Supplier: Electron Microscopy Sciences

Description: An all glass apparatus that casts uniformly thin films of parlodion, formvar, or butvar directly onto 1 x 3 microscope slides.

Supplier: Electron Microscopy Sciences

Description: This is a direct replacement for Kodak Polycontrast IV RC B&W Papers. MULTIGRADE RC Warmtone Paper has the standard weight of (190g/m²) with a resin coated base. It is equally suitable for printing conventional black and white and XP2 SUPER negatives.

Supplier: Electron Microscopy Sciences

Description: MULTIGRADE is a liquid developer which is concentrated and it is suitable for all black and white papers. It can be used at a standard dilution of 1+9 or at 1+14 for greater development control and economy. MULTIGRADE developer is clean working and has excellent keeping properties and gives a neutral image tone with most papers. MULTIGRADE is designed for use at ambient room temperatures, normally 20°C/68°F. We do not recommend its use for high temperature or machine processing applications. It is not suitable for film developing.

Catalog Number: (100494-096)

Supplier: Electron Microscopy Sciences

Description: Universal glass-type masking negative carriers features four individually adjustable masking blades and removable glass inserts

Supplier: Electron Microscopy Sciences

Description: PRO-LINE Archival Sleeving is a specially formulated 3-mil archival polypropylene which has a physical density that is less than other sleeving materials, making it more pliable and gentle to the film

Supplier: Electron Microscopy Sciences

Description: This is a direct replacement for Kodak Kodabrome II RC B&W Papers. Premium Quality Graded Paper on a Resin Coated Base. MULTIGRADE RC COOLTONE Paper has the standard weight of (190g/m²) with a resin coated base. It is suitable for a wide range of applications including commercial, press, industrial, advertising, and display work. Can be used with virtually all safelights for B&W papers. Neutral Tone Graded RC, can be either dish/tray processed or machine processed. Latent image ability.

Supplier: Electron Microscopy Sciences

Description: Ilford Rapid Fixer is a non-hardening rapid fixer supplied as a liquid concentrate for fixing black and white film and paper in all manual and machine processing applications. It is easy and convenient to use in the temperature range of 18 – 40°C (64 -104°F). Ilford Rapid Fixer must not be used with fix hardeners.