You Searched For: Antimony+(III)+butanolate


96,334  results were found

Sort Results

List View Easy View
SearchResultCount:"96334"
Description: Tricine was first prepared by Good for use as a buffer for chloroplast reactions. It is structurally similar to Tris, but is much less inhibitory at high concentrations. For ATP assays using firefly luciferase, tricine buffer at 25 mM was found to be the best of ten common buffers tested.
Tricine is used as buffer component for separation of low molecular weight peptides. Tricine can be used in cryopreservation medium for the preservation of tissues and organs. Cryopreservation depends on the physical and chemical characteristics of the preservation medium used. The pH values and pK values for tricine/DMSO mixtures has been reported down to -20 °C. Tricine has been found to be an efficient scavenger of hydroxyl radicals in a study of radiation-induced membrane damage. Tricine is typically the buffer of choice in SDS-PAGE systems when separating proteins in the range of 1 to 100 kDa.
A buffer may be prepared by titrating with sodium hydroxide to the desired pH, using about a half-equivalent of NaOH.
Catalog Number: IC807416
Supplier: MP Biomedicals

SDS


Description: Used as a buffer in biological research. HEPPSO is an efficient separator in protein resolution by IEF.
Catalog Number: IC15123610
Supplier: MP Biomedicals

SDS


Description: Tris have been useful as buffers in a wide variety of biological systems. It has been used as a starting material for polymers, oxazolones (with carboxylic acids) and oxazolidines (with aldehydes). It does not precipitate calcium salts and is of value in maintaining solubility of manganese salts. It can be used for the direct standardization of a strong acid solution; the equivalence point can be determined either potentiometrically or by use of a suitable indicator such as 3-(4-Dimethylamino-1-naphthylazo)-4-methoxybenzenesulfonic acid. It is RNAse and DNAse-free. Tris is relatively non-hygroscopic; but, if needed, it can be dried at 100°C for up to 4 hours to remove any water.
Tris is used in pH control in vitro and in vivo for body fluids and in buffering systems for electrophoresis applications. Tris is used in assays used to characterize the activity and kinetics of the enzymes that catalyze SUMOylation of Small ubiquitin-like proteins (SUMO) and SUMO-dependent protein-protein interactions.
Catalog Number: IC819620
Supplier: MP Biomedicals

SDS


Description: Tris has been useful as buffers in a wide variety of biological systems. Uses include pH control in vitro and in vivo for body fluids and in buffering systems for electrophoresis applications. Tris has been used as a starting material for polymers, oxazolones (with carboxylic acids) and oxazolidines (with aldehydes). Tris does not precipitate calcium salts and is of value in maintaining solubility of manganese salts. It can be used for the direct standardization of a strong acid solution; the equivalence point can be determined either potentiometrically or by use of a suitable indicator such as 3-(4-Dimethylamino-1-naphthylazo)-4-methoxybenzenesulfonic acid. It is an auxiliary material in pharmaceutical science.
Store at Room Temperature (15-30 °C). Store dessicated.
Catalog Number: 76177-430
Supplier: MP Biomedicals


Description: The QX-102 Capsules are used for imaging various wet materials and biological samples, such as liquid samples (foods, cosmetics, oils, paints, etc.), particles in solutions, adherent and non-adherent human and animal cells, and microorganisms.
Catalog Number: 102101-362
Supplier: Electron Microscopy Sciences


Description: Tris have been useful as buffers in a wide variety of biological systems. It has been used as a starting material for polymers, oxazolones (with carboxylic acids) and oxazolidines (with aldehydes). It does not precipitate calcium salts and is of value in maintaining solubility of manganese salts. It can be used for the direct standardization of a strong acid solution; the equivalence point can be determined either potentiometrically or by use of a suitable indicator such as 3-(4-Dimethylamino-1-naphthylazo)-4-methoxybenzenesulfonic acid. It is RNAse and DNAse-free. Tris is relatively non-hygroscopic ; but, if needed, it can be dried at 100 °C for up to 4 hours to remove any water.
Tris is used in pH control in vitro and in vivo for body fluids and in buffering systems for electrophoresis applications.Tris is used in assays used to characterize the activity and kinetics of the enzymes that catalyze SUMOylation of Small ubiquitin-like proteins (SUMO) and SUMO-dependent protein-protein interactions.
Catalog Number: IC10313305
Supplier: MP Biomedicals

SDS


Description: Cell Biolabs’ Uric Acid/Uricase Assay Kit is a simple HTS-compatible assay for measuring uric acid concentrations in biological samples such as serum, plasma, and urine without any need for pretreatment.  The kit has a detection sensitivity limit of 0.5 µM of uric acid or 1 mU/mL of uricase
Catalog Number: 102965-042
Supplier: Cell Biolabs


Description: The ZNF607 Antibody from Novus Biologicals is a rabbit polyclonal antibody to ZNF607. This antibody reacts with human. The ZNF607 Antibody has been validated for the following applications: Immunohistochemistry, Immunohistochemistry-Paraffin.
Catalog Number: 103285-908
Supplier: Novus Biologicals


Description: The RAP1GAP2 Antibody from Novus Biologicals is a rabbit polyclonal antibody to RAP1GAP2. This antibody reacts with human. The RAP1GAP2 Antibody has been validated for the following applications: Immunohistochemistry, Immunohistochemistry-Paraffin.
Catalog Number: 103280-934
Supplier: Novus Biologicals


Description: The CPAMD8 Antibody from Novus Biologicals is a rabbit polyclonal antibody to CPAMD8. This antibody reacts with human. The CPAMD8 Antibody has been validated for the following applications: Immunohistochemistry, Immunohistochemistry-Paraffin.
Catalog Number: 103280-912
Supplier: Novus Biologicals


Description: The AADACL4 Antibody from Novus Biologicals is a rabbit polyclonal antibody to AADACL4. This antibody reacts with human. The AADACL4 Antibody has been validated for the following applications: Immunohistochemistry, Immunohistochemistry-Paraffin.
Catalog Number: 103286-534
Supplier: Novus Biologicals


Description: The SH3D21 Antibody from Novus Biologicals is a rabbit polyclonal antibody to SH3D21. This antibody reacts with human. The SH3D21 Antibody has been validated for the following applications: Immunohistochemistry, Immunocytochemistry / Immunofluorescence, Immunohistochemistry-Paraffin.
Catalog Number: 103285-408
Supplier: Novus Biologicals


Description: The C7orf72 Antibody from Novus Biologicals is a rabbit polyclonal antibody to C7orf72. This antibody reacts with human. The C7orf72 Antibody has been validated for the following applications: Immunohistochemistry, Immunocytochemistry / Immunofluorescence, Immunohistochemistry-Paraffin.
Catalog Number: 103285-450
Supplier: Novus Biologicals


Description: The ZNF574 Antibody from Novus Biologicals is a rabbit polyclonal antibody to ZNF574. This antibody reacts with human. The ZNF574 Antibody has been validated for the following applications: Immunohistochemistry, Immunocytochemistry / Immunofluorescence, Immunohistochemistry-Paraffin.
Catalog Number: 103285-900
Supplier: Novus Biologicals


Description: The INT2 Antibody from Novus Biologicals is a rabbit polyclonal antibody to INT2. This antibody reacts with human. The INT2 Antibody has been validated for the following applications: Immunohistochemistry, Immunocytochemistry / Immunofluorescence, Immunohistochemistry-Paraffin.
Catalog Number: 103286-418
Supplier: Novus Biologicals


Description: The ZNF662 Antibody from Novus Biologicals is a rabbit polyclonal antibody to ZNF662. This antibody reacts with human. The ZNF662 Antibody has been validated for the following applications: Immunohistochemistry, Immunohistochemistry-Paraffin.
Catalog Number: 103287-240
Supplier: Novus Biologicals


113 - 128 of 96,334