Print…

You Searched For: Distillation+Components


47,594  results were found

Refine Results Sort by

Sort Results

List View Easy View
SearchResultCount:"47594"

Rate These Search Results

Product Image-89001-744

Distillation and Reactors Apparatus Full Length [standard taper] 19/38 Joints

Description: [standard taper] Stopper; 22 Flask Only, 500 mL KIMAX apparatus used in general purpose distillation and phenol distillation. Flask has a flat bottom and a distillation head with a [standard taper] 19/38 joint.
Catalog Number: 89001-744
Supplier: DWK Life Sciences (KIMBLE)
Image Unavailable-20203-004

Iowa State Adapter

Description: With inclined plate. 15.2x15.2cm. For Iowa State Distilling apparatus which is used for determinations in the citrus industry, but applicable to other distilling procedures.
Catalog Number: 20203-004
Supplier: HGF Glass
Product Image-KT287801-0000

Distillation and Reactors Receiver Cow-Type

Description: Distribution Adapter Cow-type design having three receivers spaced 45 apart. Condensers with drip joints will protrude into the spherical section, keeping wetted surfaces and product hold-up to a minimum.
Catalog Number: KT287801-0000
Supplier: DWK Life Sciences (KIMBLE)
Image Unavailable-89107-070

heating unit

Description: Has threaded fitting to match the bottom of the cash still. The unit utilizes a wire coil element controlled by toggle power switch.
Catalog Number: 89107-070
Supplier: General Glass Blowing
Product Image-KT517000-2440

Distillation and Reactors Trap Foam-Type

Description: [standard taper] Joints; 24/40. Bulb Diameter (mm); 65. Approx. Overall Height x Width (mm); 215 x 65 Foam-type designed to prevent carry-over into other components of the distillation assembly.
Catalog Number: KT517000-2440
Supplier: DWK Life Sciences (KIMBLE)
Product Image-80067-904

DISTILLING RECEIVER

Description: Replacement Components. Receiver Tube, 14/20, 12ml. The 135[degree] angle between the center line of the condenser and the receiver tubes allow the distillate to fall directly into the receiver tubes. This receiver can be used with short path style distilling heads.
Catalog Number: 80067-904
Supplier: Chemglass

Small Business Enterprise


Product Image-10034-160

Chain Clamp, 12 In Arm, Clamp Can Accommodate Up to 6-1/2 In (170Mm) O.D. Respectively.

Catalog Number: 10034-160
Supplier: Chemglass

Small Business Enterprise


Image Unavailable-EM-691124-2

Solvent Line Quick Connect 1/4" O.D. Compression Fitting

Description: Solvent Line Quick Connect <sup>1</sup>/<sub>4</sub>" O.D. Compression Fitting
Catalog Number: EM-691124-2
Supplier: MilliporeSigma
Product Image-10034-382

Side Support Distillation Shelf

Description: With PTFE Ring for 10L-20L Reactor Stands, for Use with Cg-1965-X-150 Support Frame, Supports 5-10L Rbf Capacity, 12 In W X 19 In L
Catalog Number: 10034-382
Supplier: Chemglass

Small Business Enterprise


Product Image-10034-384

Side Support Distillation Shelf

Description: With PTFE Ring for 30L-50L Reactor Stands, for Use with Cg-1968-X Support Frames, Supports 10-20L Rbf Capacity, 12-7/8 In W X 13 In L
Catalog Number: 10034-384
Supplier: Chemglass

Small Business Enterprise


Product Image-20762-096

Thermometer Adapter, Screw Thread Size: 20-400

Description: 'O' ring holds thermometer or gas inlet tube securely. Grease-free Wheaton Connection on one end provides an inert connection with exterior-threaded glass components. Can also be used with gas inlet tubing, etc.
Catalog Number: 20762-096
Supplier: DWK Life Sciences (KIMBLE)

Small Business Enterprise


Product Image-80061-198

REACTION KETTLE LID, DURAN, FLAT GROUND

Description: Flange I.D; 60mm; Flange O.D; 100mm; Overall Height: 42mm. Dome style lid for construction of single or multiple neck reaction kettle heads. Mating surface is ground.
Catalog Number: 80061-198
Supplier: Chemglass

Small Business Enterprise


Product Image-80061-200

REACTION KETTLE LID, DURAN, FLAT GROUND

Description: Flange I.D; 100mm; Flange O.D; 138mm; Overall Height: 65mm. Dome style lid for construction of single or multiple neck reaction kettle heads. Mating surface is ground.
Catalog Number: 80061-200
Supplier: Chemglass

Small Business Enterprise


Product Image-80061-202

REACTION KETTLE LID, DURAN, FLAT GROUND

Description: Flange I.D; 120mm; Flange O.D; 158mm; Overall Height: 70mm. Dome style lid for construction of single or multiple neck reaction kettle heads. Mating surface is ground.
Catalog Number: 80061-202
Supplier: Chemglass

Small Business Enterprise


Product Image-80061-204

REACTION KETTLE LID, DURAN, FLAT GROUND

Description: Flange I.D; 150mm; Flange O.D; 184mm; Overall Height: 70mm. Dome style lid for construction of single or multiple neck reaction kettle heads. Mating surface is ground.
Catalog Number: 80061-204
Supplier: Chemglass

Small Business Enterprise


Product Image-80061-206

REACTION KETTLE LID, DURAN, FLAT GROUND

Description: Flange I.D; 200mm; Flange O.D; 242mm; Overall Height: 95mm. Dome style lid for construction of single or multiple neck reaction kettle heads. Mating surface is ground.
Catalog Number: 80061-206
Supplier: Chemglass

Small Business Enterprise


81 - 96 of 47,594