Print…

You Searched For: Chemical Fume Hoods

Designed to guarantee laboratory conditions and researchers remain safe at all times, the chemical fume hoods protect against flammable or toxic chemicals. These protection devices have clear sashes that slide horizontally or vertically into place and support high working visibility. Constructed for maximum chemical resistance, the leak-proof enclosures will not corrode even with heavy routine use and corrosive spills. The chemical fume hoods circulate and filter air to eliminate possible vapors produced.

Designed to guarantee laboratory conditions and researchers remain safe at all times, the chemical fume hoods protect against flammable or toxic chemicals. These protection devices have clear sashes that slide horizontally or vertically into place and support high working visibility. Constructed for maximum chemical resistance, the leak-proof enclosures will not corrode even with heavy routine use and corrosive spills. The chemical fume hoods circulate and filter air to eliminate possible vapors produced.


523  results were found

Refine Results Sort by

Sort Results

List View Easy View
SearchResultCount:"523"

Rate These Search Results

Product Image-76045-684

Work Surfaces for Protector ClassMate Hood 6 feetx25.88in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 6 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left/Right rear pre-cut 6inx3in oval sink cutouts
Catalog Number: 76045-684
Supplier: Labconco
Product Image-76045-674

Work Surfaces for Protector ClassMate Hood 5 feetx25.88in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left/Right rear pre-cut 6inx3in oval sink cutouts
Catalog Number: 76045-674
Supplier: Labconco
Product Image-76045-670

Work Surfaces for Protector ClassMate Hood 5 feetx25.88 in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left rear pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-670
Supplier: Labconco
Product Image-76045-660

Work Surfaces for Protector ClassMate Hood 4 feetx25.88 in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left rear pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-660
Supplier: Labconco
Product Image-76045-664

Work Surfaces for Protector ClassMate Hood 4 feetx25.88in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left/Right rear pre-cut 6inx3in oval sink cutouts
Catalog Number: 76045-664
Supplier: Labconco
Product Image-76045-666

Work Surfaces for Protector ClassMate Hood 5 feetx25.88 in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Right rear pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-666
Supplier: Labconco
Product Image-76045-668

Work Surfaces for Protector ClassMate Hood 5 feetx25.88 in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Right side pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-668
Supplier: Labconco
Product Image-76045-678

Work Surfaces for Protector ClassMate Hood 5 feetx25.88in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left rear/Right side pre-cut 6inx3in oval cutouts
Catalog Number: 76045-678
Supplier: Labconco
Product Image-76045-680

Work Surfaces for Protector ClassMate Hood 5 feetx25.88in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left side/Right rear pre-cut 6inx3in oval cutouts
Catalog Number: 76045-680
Supplier: Labconco
Product Image-76045-658

Work Surfaces for Protector ClassMate Hood 4 feetx25.88 in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Right side pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-658
Supplier: Labconco
Product Image-76045-662

Work Surfaces for Protector ClassMate Hood 4 feetx25.88 in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left side pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-662
Supplier: Labconco
Product Image-76045-672

Work Surfaces for Protector ClassMate Hood 5 feetx25.88 in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left side pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-672
Supplier: Labconco
Product Image-76045-676

Work Surfaces for Protector ClassMate Hood 5 feetx25.88in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left/Right side pre-cut 6inx3in oval sink cutouts
Catalog Number: 76045-676
Supplier: Labconco
Product Image-76045-688

Work Surfaces for Protector ClassMate Hood 6 feetx25.88in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 6 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left rear/Right side pre-cut 6inx3in oval cutouts
Catalog Number: 76045-688
Supplier: Labconco
Product Image-76045-690

Work Surfaces for Protector ClassMate Hood 6 feetx25.88in

Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 6 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left side/Right rear pre-cut 6inx3in oval cutouts
Catalog Number: 76045-690
Supplier: Labconco
Product Image-10769-388

Work Surface

Description: SpillStopper Work Surface, 4 ft w x 36in d, with cupsink cutouts, left rear and right side. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate. Interior of Protector Hood
Catalog Number: 10769-388
Supplier: Labconco
129 - 144 of 523