You Searched For: Chemical Fume Hoods

Designed to guarantee laboratory conditions and researchers remain safe at all times, the chemical fume hoods protect against flammable or toxic chemicals. These protection devices have clear sashes that slide horizontally or vertically into place and support high working visibility. Constructed for maximum chemical resistance, the leak-proof enclosures will not corrode even with heavy routine use and corrosive spills. The chemical fume hoods circulate and filter air to eliminate possible vapors produced.

Designed to guarantee laboratory conditions and researchers remain safe at all times, the chemical fume hoods protect against flammable or toxic chemicals. These protection devices have clear sashes that slide horizontally or vertically into place and support high working visibility. Constructed for maximum chemical resistance, the leak-proof enclosures will not corrode even with heavy routine use and corrosive spills. The chemical fume hoods circulate and filter air to eliminate possible vapors produced.


523  results were found

Sort Results

List View Easy View
SearchResultCount:"523"
Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 6 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left rear pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-942
Supplier: Labconco


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Pre-cut 6inx3in oval cupsink cutout optional
Catalog Number: 76045-934
Supplier: Labconco


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left rear/Right side pre-cut 6inx3in oval cutouts
Catalog Number: 76045-930
Supplier: Labconco


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Right rear pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-926
Supplier: Labconco


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 6 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Right rear pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-938
Supplier: Labconco


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left/Right rear pre-cut 6inx3in oval sink cutouts
Catalog Number: 76045-664
Supplier: Labconco


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Right rear pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-666
Supplier: Labconco


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 6 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left/Right side pre-cut 6inx3in oval sink cutouts
Catalog Number: 76045-686
Supplier: Labconco


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left rear/Right side pre-cut 6inx3in oval cutouts
Catalog Number: 76045-678
Supplier: Labconco


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 5 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left side/Right rear pre-cut 6inx3in oval cutouts
Catalog Number: 76045-680
Supplier: Labconco


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Right side pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-658
Supplier: Labconco


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 6 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left/Right rear pre-cut 6inx3in oval sink cutouts
Catalog Number: 76045-684
Supplier: Labconco


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 4 feetx25.88 in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left side pre-cut 6inx3in oval cupsink cutout
Catalog Number: 76045-662
Supplier: Labconco


Description: Work Surface
Catalog Number: 10018-928
Supplier: Labconco


Description: Work Surfaces for Protector ClassMate Hood, Dimensions: 6 feetx25.88in, Molded of corrosion-resistant epoxy resins, 1.5in diameter holes for venting and 2.5in diameter holes for plumbing, Left rear/Right side pre-cut 6inx3in oval cutouts
Catalog Number: 76045-688
Supplier: Labconco


Description: Guardian™ Digital Airflow Monitor for Fiberglass 30 Hoods
Catalog Number: 74920-162
Supplier: Labconco


177 - 192 of 523