Print…

You Searched For: Chemical Fume Hoods

Designed to guarantee laboratory conditions and researchers remain safe at all times, the chemical fume hoods protect against flammable or toxic chemicals. These protection devices have clear sashes that slide horizontally or vertically into place and support high working visibility. Constructed for maximum chemical resistance, the leak-proof enclosures will not corrode even with heavy routine use and corrosive spills. The chemical fume hoods circulate and filter air to eliminate possible vapors produced.

Designed to guarantee laboratory conditions and researchers remain safe at all times, the chemical fume hoods protect against flammable or toxic chemicals. These protection devices have clear sashes that slide horizontally or vertically into place and support high working visibility. Constructed for maximum chemical resistance, the leak-proof enclosures will not corrode even with heavy routine use and corrosive spills. The chemical fume hoods circulate and filter air to eliminate possible vapors produced.


523  results were found

Refine Results Sort by

Sort Results

List View Easy View
SearchResultCount:"523"

Rate These Search Results

Product Image-10769-484

Work Surface

Description: SpillStopper Work Surface, 6 ft w x 36in d, with cupsink cutouts, left and right side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-484
Supplier: Labconco
Product Image-10769-476

Work Surface

Description: SpillStopper Work Surface, 6 ft w x 36in d, no cutouts, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-476
Supplier: Labconco
Product Image-10769-436

Work Surface

Description: SpillStopper Work Surface, 4 ft w x 36in d, no cutouts, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-436
Supplier: Labconco
Product Image-10769-462

Work Surface

Description: SpillStopper Work Surface, 3 ft w x 36in d, no cutouts, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-462
Supplier: Labconco
Product Image-10769-440

Work Surface

Description: SpillStopper Work Surface, 4 ft w x 36in d, with cupsink cutout, right side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-440
Supplier: Labconco
Product Image-10769-470

Work Surface

Description: SpillStopper Work Surface, 3 ft w x 36in d, with cupsink cutouts, left and right rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-470
Supplier: Labconco
Product Image-10769-432

Work Surface

Description: SpillStopper Work Surface, 3 ft w x 36in d, with cupsink cutouts, left side and right rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-432
Supplier: Labconco
Product Image-10769-466

Work Surface

Description: SpillStopper Work Surface, 3 ft w x 36in d, with cupsink cutout, right side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-466
Supplier: Labconco
Product Image-10769-474

Work Surface

Description: SpillStopper Work Surface, 3 ft w x 36in d, with cupsink cutout, left side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-474
Supplier: Labconco
Product Image-10769-478

Work Surface

Description: SpillStopper Work Surface, 6 ft w x 36in d, with cupsink cutouts, left rear and right side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-478
Supplier: Labconco
Product Image-10769-482

Work Surface

Description: SpillStopper Work Surface, 6 ft w x 36in d, with cupsink cutouts, left side and right rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-482
Supplier: Labconco
Product Image-10769-486

Work Surface

Description: SpillStopper Work Surface, 8 ft w x 36in d, no cutouts, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-486
Supplier: Labconco
Product Image-10769-448

Work Surface

Description: SpillStopper Work Surface, 5 ft w x 36in d, with cupsink cutouts, left rear and right side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-448
Supplier: Labconco
Product Image-10769-442

Work Surface

Description: SpillStopper Work Surface, 4 ft w x 36in d, with cupsink cutout, left rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-442
Supplier: Labconco
Product Image-10769-446

Work Surface

Description: SpillStopper Work Surface, 5 ft w x 36in d, with cupsink cutouts, left and right rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-446
Supplier: Labconco
Product Image-10769-452

Work Surface

Description: SpillStopper Work Surface, 5 ft w x 36in d, with cupsink cutouts, left side and right rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate
Catalog Number: 10769-452
Supplier: Labconco
145 - 160 of 523